Tension is the single setting that decides whether a joint holds. Too little and the load shifts; too much and you crush the product or cut the band. AECSORIX tools make adjustment simple — here is how to do it correctly.

Why tension matters
With the right band and tension setting, a friction-weld joint reaches around 75% of the strap’s own tensile strength. That figure only holds if the tension is set for the band width and the load. A setting that is perfect for 13 mm PP will be wrong for 19 mm PET.
Step-by-step adjustment
- Load the correct band width (13–19 mm) and confirm the roll is PET or PP.
- Switch the tool on and set tension on the LCD — the range is 600 to 3500 N.
- Start mid-range for your material, then make a test joint on the actual load.
- Pull on the joint by hand: it should not slip, and the band should not show cutting at the edges.
- Adjust in small steps and repeat until the joint is stable without damaging the load.
- Lock in the setting so every operator uses the same value.
Starting points by application
| Application | Suggested starting tension |
|---|---|
| Cartons, light bundles (PP 13 mm) | 600–1200 N |
| Timber, crates (PET 13–16 mm) | 1500–2500 N |
| Steel, brick, stone (PET 16–19 mm) | 2500–3500 N |
These are starting points, not fixed rules — always confirm with a test joint on your own load and band.
Common mistakes
Using PP settings on PET (joint too weak), chasing maximum tension on compressible loads (product damage), and letting each operator choose their own value (inconsistent joints). The LCD removes the guesswork once you have found the right number.
Frequently asked questions
What if the band keeps breaking at the joint? Tension may be too high, or the band width/grade mismatched. Reduce tension and confirm band quality.
Does battery level affect tension? The tool maintains the set value; charge the pack when the indicator is low for consistent results.
Can you recommend a setting for my load? Yes — send a photo of the load and band to us and we will suggest a starting value and send a joint sample.
{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What if the band keeps breaking at the joint?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Tension may be too high, or the band width/grade mismatched. Reduce tension and confirm band quality.”}},{“@type”:”Question”,”name”:”Does battery level affect tension?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The tool maintains the set value; charge the pack when the indicator is low for consistent results.”}},{“@type”:”Question”,”name”:”Can you recommend a setting for my load?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Yes – send a photo of the load and band to us and we will suggest a starting value and send a joint sample.”}}]}
Need hands-on help? Contact AECSORIX or WhatsApp +86 13606818153 — samples ship in 3 days so you can test the joint on your own strap.
