Steel coils are heavy, dense and unforgiving. A failed band during transport is a serious safety risk, so the strapping method matters as much as the tool. This guide covers a repeatable process used in steel yards.

High-tension PET strapping on steel channels

Why steel needs a different approach

Coil edges are hard and can cut into a weak band. The load does not compress, so the strap must hold high retained tension over time. That makes 16–19 mm PET the standard choice, with a tool capable of high tension.

Preparation

Step-by-step

  1. Feed the band around the coil and through the tool according to the tool’s threading path.
  2. Set tension on the LCD in the high range (typically 2500–3500 N for 16–19 mm PET).
  3. Apply tension evenly; confirm the band sits flat and does not twist.
  4. Trigger the friction weld and cut. Check that the joint is clean and the band is not nicked at the edges.
  5. Test the joint by hand, then repeat for the remaining straps.

Safety notes

Keep hands clear of the tensioning path, wear gloves and eye protection, and never stand in line with a band under full tension. Replace worn cutter and friction parts on schedule — a degraded weld is the main cause of joint failure.

Recommended setup

AECSORIX AE01/AE02 battery tools accept 13–19 mm band and deliver up to 3500 N with an LCD setting, so one tool can handle coils and other loads in the same yard. Two batteries keep the tool running through a full shift; stocked spares cover the wear parts.

PET strapping securing dense stone loads

Frequently asked questions

How many straps does a coil need? It depends on width and weight — commonly two or more. Send us your coil dimensions and we will advise.

Can PP band be used on steel coils? Not recommended. PP relaxes over time and lacks the retained tension heavy coils need; use PET.

Do you supply edge protectors? We supply tools and spares; tell us your setup and we will confirm what you need.

{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”How many straps does a coil need?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It depends on width and weight – commonly two or more. Send us your coil dimensions and we will advise.”}},{“@type”:”Question”,”name”:”Can PP band be used on steel coils?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Not recommended. PP relaxes over time and lacks the retained tension heavy coils need; use PET.”}},{“@type”:”Question”,”name”:”Do you supply edge protectors?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”We supply tools and spares; tell us your setup and we will confirm what you need.”}}]}

Handling steel or other heavy loads? Ask AECSORIX for a quote or WhatsApp +86 13606818153. We can send a joint sample for your band before you order.

← Back to Blog

Leave a Reply

Your email address will not be published. Required fields are marked *